Wireless Access Point Aruba AP-325 RAM 256Mb

Còn Hàng

Thông tin sản phẩm

Chế độ bảo hành:

BẢO HÀNH CHÍNH HÃNG VN/A (4512)

- Bảo hành 1 đổi 1 trong 45 ngày (áp dụng với các lỗi từ nhà sản xuất bao gồm main, nguồn, màn hình)
- Bảo hành chính hãng 12 tháng tại trung tâm bảo hành của Apple Việt Nam.

Tình trạng quy cách sản phẩm:

  • Máy mới 100% , chính hãng Apple Việt Nam.
  • Hộp, Sách hướng dẫn, Cây lấy sim, Cáp Type C.
  • Nhập trực tiếp từ các nhà phân phối Apple chính hãng tại Việt Nam: Synnex FPT, Digiworld, Dầu khí (Petrosetco), Viettel.
  • Giá bán đã bao gồm VAT
  • Wireless Access Point Aruba AP-325 RAM 256Mb
  • WiFi băng tần kép Chuẩn AC – Tốc độ: 2333Mbps
  • Băng tần 2.4Ghz: 600Mbps – MIMO 4×4
  • Băng tần 5Ghz: 1733Mbps – MIMO 4×4
  • Có 2 Cổng LAN Gigabit
  • Kết nối tối đa 256 User trên mỗi băng tần.
  • Cấp nguồn bằng: PoE 802.3at hoặc DC 12V-2.5A
Còn Hàng
1.650.000  2.200.000 
🔥 Giảm 550.000  (-25%)
Liên hệ
(0)
Đã xử lý 43/82 đơn hàng
Đã xử lý 43/82 đơn hàng
(0)
Đã xử lý 30/81 đơn hàng
Đã xử lý 30/81 đơn hàng
(0)
Đã xử lý 28/79 đơn hàng
Đã xử lý 28/79 đơn hàng

Đặc Điểm Nổi Bật

Một số tính năng đặt biệt của Wireless Access Point Aruba AP-325 RAM 256Mb:

– Hỗ trợ công nghệ 802.11ac Wave 2.0 gúp tăng băng thông và tốc độ cho các thiết bị kết nối không dây ( tăng 30% so với Wave 1.0)

– Với 2 anten Dual-band (2.4Ghz/5Ghz) hỗ trợ công nghệ mới nhất 4×4:4 MU-MIMO công suất phát mạnh mẽ (2.4Ghz là 4.0dBi và 5Ghz là 4.7dBi) gia tăng vùng phủ sóng và loại bỏ điểm chết.

– Hoạt động ở 2 giải tần 2.4Ghz và 5Ghz 802.11 ac/a/b/g/n với đa người dùng MIMO (MU-MIMO)

– Tốc độ lên tới 2333Mbps  (600Mbps cho băng tần 2.4GHz và 1733Mbpscho băng tần 5Ghz)

– Với 2 cổng mạng 10/100/1000 Base-T hỗ trợ PoE chuẩn 802.3at và 802.3af cho phép lắp đặt linh hoạt.

– Hỗ trợ 256 thiết bị truy cập đồng thời. Và cho phép thiết lập tối đa 16 SSID

– Hỗ trợ quản lý và giám sát từ xa

– Ứng dụng di động và cổng thông tin đám mây

Wireless Access Point Aruba AP-325 RAM 256Mb
Bộ phát WiFi Aruba AP-325

* Thông số kỹ thuật Wireless Access Point Aruba AP-325 RAM 256Mb:

Model Wireless Access Point Aruba AP-345

 

WI-FI Radio Specifications
  • AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 4×4 MIMO.
  • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1).
  • Four spatial stream SU-MIMO for up to 1,733 Mbps wireless data rate to a single client device.
  • Three spatial stream MU-MIMO for up to 1,300 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously.
  • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio.
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835 GHz
    • 5.150 to 5.250 GHz
    • 5.250 to 5.350 GHz
    • 5.470 to 5.725 GHz
    • 5.725 to 5.850 GHz
  • Available channels: Dependent on configured regulatory domain.
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
    • 2.4 GHz band: +24 dBm (18 dBm per chain)
    • 5 GHz band: +24 dBm (18 dBm per chain)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.
  • Maximum ratio combining (MRC) for improved receiver performance.
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance.
  • Short guard interval for 20-MHz, 40-MHz and 80-MHz channels.
  • Space-time block coding (STBC) for increased range and improved reception.
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput.
  • Transmit beamforming (TxBF) for increased signal reliability and range.
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 450 (MCS0 to MCS23)
    • 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4)
  • 802.11n high-throughput (HT) support: HT 20/40
  • 802.11ac very high throughput (VHT) support: VHT 20/40/80
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
Antennas
  • Eight integrated downtilt omni-directional antennas for 4×4 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz and 4.7 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling-mounted orientation of the AP. The downtilt angle for maximum gain is ~ 30 degrees. Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 2.7dBi in 2.4GHz and 2.9dBi in 5GHz.

 

Other Interface
  • Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
    • Auto-sensing link speed and MDI/MDX
    • Load balancing support to achieve platform throughput greater than 1 Gbps
    • 802.3az Energy Efficient Ethernet (EEE)
    • PoE-PD: 48 Vdc (nominal) 802.3af or 802.3at PoE
  • DC power interface, accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length
  • USB 2.0 host interface (Type A connector)
  • Bluetooth Low Energy (BLE) radio
    • Up to 4dBm transmit power (class 2) and -94dBm receive sensitivity
    • Integrated antenna, -5dBi gain (30 degree downtilt)
    • Can be disabled with configuration
  • Visual indicators (tri-color LEDs): For system and radio status
  • Reset button: Factory reset (during device power up)
  • Serial console interface (RJ-45)
  • Kensington security slot
Power
  • Maximum (worst-case) power consumption: 20W (802.3at PoE), 13.5W (802.3af PoE) or 18.5W (DC)
    • Excludes power consumed by external USB device (and internal overhead); this could add up to 6W (POE) or 5.5W (DC) for 5W/1A USB device
  • Maximum (worst-case) power consumption in idle mode: 8W (PoE) or 7W (DC).
  • Direct DC source: 48Vdc nominal, +/- 5%.
  • Power over Ethernet (PoE): 12 Vdc (nominal) 802.3af/802.3at compliant source
    • Unrestricted functionality with 802.3at PoE
    • Power-save mode with reduced functionality from 802.3af PoE
  • USB port disabled
  • Second Ethernet port disabled
  • 2.4 GHz radio in 1×1:1 mode
  • Power sources sold separately
  • When both power sources are available, DC power takes priority
Environmental & Reliability

 

  • Operating:
    • Temperature: 0° C to +50° C (+32° F to +122° F)
    • Humidity: 5% to 93% non-condensing
  • Storage and transportation:
    • Temperature: -40° C to +70° C (-40° F to +158° F)
Certifications
  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
  • Bluetooth SIG interoperability certification
  • Passpoint® (Release 2) with ArubaOS and Instant 8.3+
Minimum Software Versions
Mechanical
  • Dimensions/weight (unit, excluding mount accessories):
    • 203 mm (W) x 203 mm (D) x 57 mm (H), 8.0” (W) x 8.0” (D) x 2.2” (H)
    • 950 g/34 oz
  • Dimensions/weight (shipping):
    • 315 mm (W) x 265 mm (D) x 100 mm (H), 12.4” (W) x 10.4” (D) x 3.9” (H)
    • 1,350 g/48 oz

 

Đánh giá Wireless Access Point Aruba AP-325 RAM 256Mb
Chưa có
đánh giá nào
5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá Wireless Access Point Aruba AP-325 RAM 256Mb
Gửi ảnh thực tế
0 ký tự (Tối thiểu 10)
    +

    Lưu ý: để đánh giá được phê duyệt, vui lòng tham khảo Chính sách bảo mật

    Chưa có đánh giá nào.

    Hỏi đáp

    Không có bình luận nào

    Thông Số Kỹ Thuật

    [thong_so_ky_thuat]
    Đóng So sánh ngay Xoá tất cả sản phẩm
    Đóng

    Tìm kiếm sản phẩm

    Chat ngay